| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: Possible to set EOS in asyn to match a character plus whatever character follows? |
| From: | Mark Rivers <[email protected]> |
| To: | "'Andrew Gomella'" <[email protected]>, "[email protected] Talk" <[email protected]> |
| Date: | Tue, 17 Feb 2015 19:40:23 +0000 |
|
Is the checksum a fixed length? If so you could do: - Set terminator to be the constant character - Read to terminator - Set no terminator - Read with length=checksum length Mark From: [email protected] [mailto:[email protected]]
On Behalf Of Andrew Gomella Hi, Is it possible to do this? My serial device always responds with the same ASCII character code followed by a checksum. My current implementations of both serial device and asyn have considerable issues with this because it relies on the read timing out rather than
end of string being reached. Thanks, Andrew
Andrew Gomella |