1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | synApps_5_7 build error (sscanSupport.dbd) |
From: | "Specht, Eliot D." <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Sun, 22 Feb 2015 14:43:28 +0000 |
I’m having problems with a simple epics installation on a linux (RHEL7) x86_64 computer. I built base-3.15.1. In synApps_5_7/support I ran make release make clean make The build fails with the error: make[4]: Entering directory `/opt/epics/synApps_5_7/support/sscan-2-9/sscanApp/src/O.linux-x86_64' make[4]: *** No rule to make target `sscanSupport.dbd', needed by `../../../dbd/sscanSupport.dbd'. Stop. make[4]: Leaving directory `/opt/epics/synApps_5_7/support/sscan-2-9/sscanApp/src/O.linux-x86_64' Is synApps_5_7 compatible with base-3.15.1? Eliot Specht Voice: (865)574-7682 Oak Ridge National Laboratory FAX: (865)574-4913 P.O. Box 2008, MS 6064 Oak Ridge, TN 37831-6064 |