1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: macro value |
From: | "Goetze, Kurt A." <[email protected]> |
To: | l123173 <[email protected]>, "[email protected]" <[email protected]> |
Date: | Mon, 20 Apr 2015 17:36:58 +0000 |
Hi Xing Li, You will know what your macro values should be based on the line that loads the scaler database into your ioc, usually in a startup
command file called “st.cmd”. In our case st.cmd loads “vme.cmd”, which contains a line like this: dbLoadRecords(“$(STD)/stdApp/Db/scaler.db”,”P=xyz:,S=scaler1,OUT=#C0 S0 @,DTYP=Joerger VSC8/16,FREQ=10000000”) “P=xyz:” and “S=scaler1” are the macro values you care about in this case because they are used in the PV name, and that’s what you’re
connecting to with medm. Hope this helps, Kurt From: [email protected] [mailto:[email protected]]
On Behalf Of l123173 Hi tech-talk, |