1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: areaDetector overlay plugin: overlay does not appear |
From: | Zachary Brown <[email protected]> |
To: | "Specht, Eliot D." <[email protected]> |
Cc: | "[email protected]" <[email protected]> |
Date: | Thu, 11 Jun 2015 09:21:41 -0400 |
I'm using the aravisGigE driver for areaDetector with a Basler acA1920-25gc camera. I can acquire images and save them as files, but the overlays generated by NDPluginOverlay are not showing up. I have:
GigE Driver
BASLER:CAM:PortName_RBV CAM1
NDOverlay
BASLER:Over1:PortName_RBV OVER1
BASLER:Over1:NDArrayPort_RBV CAM1
BASLER:Over1:EnableCallbacks_RBV Enable
NDStdArrays
BASLER:Image1:PortName_RBV Image1
BASLER:Image1:NDArrayPort_RBV CAM1
BASLER:Image1:EnableCallbacks_RBV Enable
NDFileTiff
BASLER:TIFF1:NDArrayPort_RBV CAM1
BASLER:TIFF1:EnableCallbacks_RBV Enable
I suspect that this should be modified so that the output of NDOverlay becomes the input of NDFileTiff; I would appreciate guidance in how to do this.
Eliot Specht Voice: (865)574-7682
Oak Ridge National Laboratory FAX: (865)574-4913
P.O. Box 2008, MS 6064
Oak Ridge, TN 37831-6064