I'm using the aravisGigE driver for areaDetector with a Basler acA1920-25gc camera. I can acquire images and save them as files, but the overlays generated by NDPluginOverlay are not showing up. I have:
GigE Driver
BASLER:CAM:PortName_RBV CAM1
NDOverlay
BASLER:Over1:PortName_RBV OVER1
BASLER:Over1:NDArrayPort_RBV CAM1
BASLER:Over1:EnableCallbacks_RBV Enable
NDStdArrays
BASLER:Image1:PortName_RBV Image1
BASLER:Image1:NDArrayPort_RBV CAM1
BASLER:Image1:EnableCallbacks_RBV Enable
NDFileTiff
BASLER:TIFF1:NDArrayPort_RBV CAM1
BASLER:TIFF1:EnableCallbacks_RBV Enable
I suspect that this should be modified so that the output of NDOverlay becomes the input of NDFileTiff; I would appreciate guidance in how to do this.
Eliot Specht Voice: (865)574-7682
Oak Ridge National Laboratory FAX: (865)574-4913
P.O. Box 2008, MS 6064
Oak Ridge, TN 37831-6064
- Replies:
- Re: areaDetector overlay plugin: overlay does not appear Zachary Brown
- Navigate by Date:
- Prev:
Re: EPICS support for Tektronix AFG3251C Hinko Kocevar
- Next:
FW: Draft requirements document for enhanced EPICS motor support Mark Clift
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: EPICS support for Tektronix AFG3251C Hinko Kocevar
- Next:
Re: areaDetector overlay plugin: overlay does not appear Zachary Brown
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|