EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: RE: New sequencer releases
From: Mark Rivers <[email protected]>
To: "'Benjamin Franksen'" <[email protected]>, "EPICS Techtalk" <[email protected]>
Date: Wed, 30 Sep 2015 19:20:03 +0000 
Hi Ben and Freddie,

Thanks very much for the new releases.

I have verified that seq-2.2.3 works for me with EPICS base 3.14.12.5 on the following platforms:

win32-x86
win32-x86-static
windows-x64
windows-x64-static
linux-x86
linux-x86_64
vxWorks-ppc32

On Windows I tested with Visual Studio 2010, gnumake 4.1, and ActiveState Perl 5.14.2.

On all platforms except vxWorks-ppc32 I also ran "make -s runtests" to run the tests, and all were successful.

Mark

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Benjamin Franksen
Sent: Wednesday, September 30, 2015 7:53 AM
To: EPICS Techtalk
Subject: New sequencer releases

Hi Everyone

Two new releases for the sequencer are available: seq-2.1.20 and
seq-2.2.3. Details as usual in the release notes on the sequencer's home
page:

  http://www-csr.bessy.de/control/SoftDist/sequencer/

(Note that for version 2.1 the URL is

  http://www-csr.bessy.de/control/SoftDist/sequencer-2-1/ .)

The main changes in both versions are improvements to the build and test
systems. In particular, building and running the tests should now work
on Windows (including cygwin) and with 32 as well as 64 bit systems.
Many thanks to the new co-maintainer Freddie Akeroyd, who did most of
this work.

In addition, version 2.2 has acquired a few bug fixes.

Cheers
Ben
-- 
"Make it so they have to reboot after every typo." ― Scott Adams
References:
New sequencer releases Benjamin Franksen
Navigate by Date:
Prev: Re: Serial port COM10: not work? Eric Norum
Next: Re: Serial port COM10: not work? Torsten Bögershausen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: New sequencer releases Benjamin Franksen
Next: sumo - builder of consistent sets of EPICS support modules, now with svn and cvs support Goetz Pfeiffer
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024