1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 <2016> 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Skip updating an output link in aSub ? |
From: | "Roehrig, Christian" <[email protected]> |
To: | Lingyun Yang <[email protected]>, "Johnson, Andrew N." <[email protected]>, "[email protected]" <[email protected]> |
Cc: | "[email protected]" <[email protected]> |
Date: | Thu, 14 Jan 2016 17:10:01 +0000 |
Hi Lingyun,
I had the same problem. I used a sequence record as an intermediary to write the values from the aSub record and I used one of the outputs from the aSub record to write to the sequence record’s mask so that I could easily change which links in the
sequence record were processed based on the aSub inputs.
Chris Roehrig
From: <[email protected]> on behalf of Lingyun Yang <[email protected]>
Date: Thursday, January 14, 2016 at 10:59 AM To: Andrew Johnson <[email protected]>, "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Subject: Re: Skip updating an output link in aSub ? Thank you all for the help.
Unfortunately this aSub is outputing both "calculation" and "action". So I want to forward the "calculations" but inhibit the actions.
This all/none solutions does not work for me.
Using calcout as Kay said should work. Although I need to write hundreds of them after splitting a waveform to individual PV, It seems have some flexibility.
Lingyun
On Thu, Jan 14, 2016 at 11:21 AM, Andrew Johnson
<[email protected]> wrote:
On 01/13/2016 09:43 PM, Michael Davidsaver wrote: -- ------------------
Lingyun YANG Skype Name: lingyun_zjdt |