IOC for keithley 6485 using asyn

[Paramveer Jain <paramveerjain89@gmail.com>]

hello,

      I am designing an IOC for Keithley 6485 using IOC

after all steps discussed in  

http://www.aps.anl.gov/epics/modules/soft/asyn/R4-3/HowToDoSerial/tutorial.html ,When I run the IOC following is the output -- 

pxbl21-1@linux-edqv:~/programs/epics/bl21/K6485/iocBoot/iocK6485> ../../bin/linux-x86_64/K6485 st.cmd 

#!../../bin/linux-x86_64/K6485

## You may have to change K6485 to something else

## everywhere it appears in this file

epicsEnvSet("BL","bl21:")

epicsEnvSet("P","K6485:")

< envPaths

epicsEnvSet("ARCH","linux-x86_64")

epicsEnvSet("IOC","iocK6485")

epicsEnvSet("TOP","/home/pxbl21-1/programs/epics/bl21/K6485")

epicsEnvSet("K6485","/home/pxbl21-1/programs/epics/bl21/K6485")

epicsEnvSet("ASYN","/home/pxbl21-1/programs/epics/modules/synApps_5_6/support/asyn-4-18")

epicsEnvSet("EPICS_BASE","/home/pxbl21-1/programs/epics/base-3.14.12.5")

##############################################################################

cd "/home/pxbl21-1/programs/epics/bl21/K6485"

## Register all support components

#dbLoadDatabase "dbd/devK6485.dbd"

dbLoadDatabase "dbd/K6485.dbd"

K6485_registerRecordDeviceDriver pdbbase

###############################################################################

# Set up ASYN ports

# drvAsynIPPortConfigure port ipInfo priority noAutoconnect noProcessEos

drvAsynSerialPortConfigure("L0","/dev/ttyUSB0",0,0,0)

asynSetOption("L0", -1, "baud", "57600")

asynSetOption("L0", -1, "bits", "8")

asynSetOption("L0", -1, "parity", "none")

asynSetOption("L0", -1, "stop", "1")

asynSetOption("L0", -1, "crtscts", "N")

###################################################################

asynSetTraceFile("L0",-1,"")

asynSetTraceMask("L0",-1,0x09)

asynSetTraceIOMask("L0",-1,0x2)

###############################################################################

## Load record instances

dbLoadRecords("db/devK6485.db","BL=bl21:,P=K6485:,R=1,L=0,A=-1,NELM=1000")

dbLoadRecords ("db/asynRecord.db","P=K6485:,R=asyn,PORT=L0,ADDR=-1,OMAX=0,IMAX=0")

cd "/home/pxbl21-1/programs/epics/bl21/K6485/iocBoot/iocK6485"

iocInit

Starting iocInit

############################################################################

## EPICS R3.14.12.5 $Date: Tue 2015-03-24 09:57:35 -0500$

## EPICS Base built Sep 15 2016

############################################################################

Warning -- devK6485 respond2Writes is set but has no command table entry with rspLen>0.

bl21:K6485:1AutozeroRBV : init_record : record type invalid for spec'd GPIB param#11

bl21:K6485:1DisplayRBV : init_record : record type invalid for spec'd GPIB param#15

bl21:K6485:1ZeroCheckRBV : init_record : record type invalid for spec'd GPIB param#12

bl21:K6485:1ZerocorrectRBV : init_record : record type invalid for spec'd GPIB param#13

bl21:K6485:1Autozero : init_record : record type invalid for spec'd GPIB param#11

bl21:K6485:1Display : init_record : record type invalid for spec'd GPIB param#15

bl21:K6485:1RangeRBV : init_record : record type invalid for spec'd GPIB param#10

iocRun: All initialization complete

## Start any sequence programs

#seq sncxxx,"user=pxbl21-1Host"

epics> 

please have a look on highlighted lines, I am unable to understand What does they mean. I hope someone to help me to get some idea.

Thanks in advance

--

With Regards,

Paramveer Jain