1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | synApps_5_8 build error |
From: | "Abdalla Ahmad" <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Sun, 8 Jan 2017 06:26:06 +0000 |
Hi I downloaded the mentioned version of synApps and I modified SUPPORT and EPICS_BASE in configure/RELEASE file as: SUPPORT=$(SYNAPPS_SUPPORT) EPICS_BASE=$(ENV_EPICS_BASE) These variables are already defined in .bashrc and exported. The list of modules for our site is Asyn Allen_Bradlley Autosave Busy (Added to resolve a similar error at compiling asyn ) Calc IP IPAC Motor SNCSEQ SSCAN STREAM Executing 'make release' then make gives the following: Definition of SNCSEQ conflicts with SUPPORT support. In this application a RELEASE file defines SNCSEQ = /home/control/epics/support/synApps_5_8/support/seq-2-2-1 but SUPPORT at /home/control/epics/support/synApps_5_8/support defines SNCSEQ = /seq-2-2-1 Definition of EPICS_BASE conflicts with SUPPORT support. In this application a RELEASE file defines EPICS_BASE = /home/control/epics/base-3.14.12.3 but SUPPORT at /home/control/epics/support/synApps_5_8/support defines EPICS_BASE =
Definition of SUPPORT conflicts with SUPPORT support. In this application a RELEASE file defines SUPPORT = /home/control/epics/support/synApps_5_8/support but SUPPORT at /home/control/epics/support/synApps_5_8/support defines SUPPORT = I have no clue of where these wrong definitions are. I thought of giving hard coded paths for the aforementioned variables instead of env ones and the build works fine. I believe
on synApps 5.6 we did not face that error. Best Regards, Abdalla Ahmad Control Engineer SESAME Allan, Jordan. Tel: (+962-5) 3511348 , ext. 265 Fax: (+962-5) 3511423 Mob: (+962-7)88183296 |