1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: Problems with motor record |
From: | Torsten Bögershausen <[email protected]> |
To: | Jörn Dreyer <[email protected]>, <[email protected]> |
Date: | Tue, 17 Oct 2017 11:21:00 +0200 |
The last problem reports smelled as if the code executed was not corresponding to the source code. (things not compiled/linked appropriately) This one looks the same. Can you put your source code somewhere ? On 17/10/17 11:07, Jörn Dreyer wrote:
Hi, still fighting with the motor record... I get a strange error message at startup of my IOC: asynPortDriver:setDoubleParam: port=port1 error setting parameter 19 in list 0, wrong type asynMotorController:writeFloat64 error, status=8 axis=0, function=19, value=0.000000 devMotorAsyn::asynCallback: m1 pasyn{Float64,Int32}->write returned <empty error message> In my parameter list the number 19 is motorClosedLoop, which indeed is an int32 parameter. I'm using basic_asyn_motor.db to setup the motor record. What goes wrong here? Regards Jörn