Experimental Physics and Industrial Control System
Are you actually using motor R6-9, or something more recent from Github?
What motor driver are you using?
Please send the output of:
asynReport 10 port1
Mark
________________________________________
From: [email protected] [[email protected]] on behalf of Jörn Dreyer [[email protected]]
Sent: Tuesday, October 17, 2017 4:07 AM
To: [email protected]
Subject: Problems with motor record
Hi,
still fighting with the motor record...
I get a strange error message at startup of my IOC:
asynPortDriver:setDoubleParam: port=port1 error setting parameter 19 in list
0, wrong type
asynMotorController:writeFloat64 error, status=8 axis=0, function=19,
value=0.000000
devMotorAsyn::asynCallback: m1 pasyn{Float64,Int32}->write returned <empty
error message>
In my parameter list the number 19 is motorClosedLoop, which indeed is an
int32 parameter. I'm using basic_asyn_motor.db to setup the motor record.
What goes wrong here?
Regards
Jörn
- Replies:
- Re: Problems with motor record Jörn Dreyer
- References:
- Problems with motor record Jörn Dreyer
- Navigate by Date:
- Prev:
Re: Problems with motor record Jörn Dreyer
- Next:
Re: Problems with motor record Jörn Dreyer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Problems with motor record Jörn Dreyer
- Next:
Re: Problems with motor record Jörn Dreyer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024