EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: Channel access blocking
From: "Mark Engbretson" <[email protected]>
To: "'Hidas, Dean'" <[email protected]>, <[email protected]>
Date: Fri, 1 Dec 2017 08:42:35 -0600
You could use

EPICS_CA_ADDR_LIST

And set it to the broadcast address(s) of the interface(s) that you want to
use and set

EPICS_CA_AUTO_ADDR_LIST=NO
So that EPICS will not try to use ever Ethernet adapter that it detects.


-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Hidas, Dean
Sent: Friday, December 1, 2017 7:27 AM
To: [email protected]
Subject: Channel access blocking

Hi,

I'm using EPICS R3.14.12.3-8.  I have a (many) PC with 2 ethernet ports
connected to different networks.  Is there a simple way to completely block
channel access from 1 of them? ie, make all PVs, beacons, etc unavailable to
that interface?

Thanks for your help,

-Dean Hidas=


Replies:
Re: Channel access blocking Mark Rivers
References:
Channel access blocking Hidas, Dean

Navigate by Date:
Prev: Re: EPID bumpless restart Mark Rivers
Next: dbGetLink question Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Channel access blocking Hidas, Dean
Next: Re: Channel access blocking Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024