1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Driver support of VMM ControlNet interface module (5136-CN-VME) |
From: | 李刚 <[email protected]> |
To: | [email protected] |
Date: | Wed, 24 Jan 2018 16:30:25 +0800 (GMT+08:00) |
Hi all,
We built the BEPC cryogenic and vacuum control system, using ControlLogix PLC via Controlnet module (EPICS driver originally developed by SNS of USA), based on EPICS Base R3.13(VME_IOC), about ten years ago, at IHEP of China.
Now, we want to update the control software from Base R3.13 to Base R3.14 with keeping the existing hardware. However, I could't find any information about EPICS Base R3.14 VxWorks driver of VME ControlNet interface module(5136-CN-VME) from the website https://epics.anl.gov/modules/bus.php#VME%2dControlNet or https://ics-web.sns.ornl.gov/.
Has anyone converted VME ControlNet driver from R3.13 to R3.14? or knows the status of VME ControlNet driver support?
Any advice or suggest is appreciated.
Best regards
Gang