Experimental Physics and Industrial Control System
Hi Torsten,
The synApps optics module has support for this type of thing:
https://github.com/epics-modules/optics/blob/master/opticsApp/Db/2slit.db
Kurt
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Torsten Bögershausen
Sent: Thursday, March 08, 2018 10:40 AM
To: [email protected]
Subject: Controling a slit system with 2 hard and 4 soft motorrs
Hej motorists,
I recently learned about the transform record, which can be used to control a slit with 2 physical axes in the way that you can set the values for GAP and CENTER and the position of the physical blades are calculated. (Or vice versa)
Does anybody have a super-duper-luxus template file which uses 4 soft motors together with some calc and transform records ?
Thanks in advance
/Torsten
- Replies:
- Re: Controling a slit system with 2 hard and 4 soft motorrs Mooney, Tim M.
- References:
- Controling a slit system with 2 hard and 4 soft motorrs Torsten Bögershausen
- Navigate by Date:
- Prev:
Re: Controling a slit system with 2 hard and 4 soft motorrs Mark Rivers
- Next:
Re: Controling a slit system with 2 hard and 4 soft motorrs Mooney, Tim M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Controling a slit system with 2 hard and 4 soft motorrs Mark Rivers
- Next:
Re: Controling a slit system with 2 hard and 4 soft motorrs Mooney, Tim M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024