Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019 
<== Date ==> <== Thread ==>

Subject: Controling a slit system with 2 hard and 4 soft motorrs
From: Torsten Bögershausen <torsten.bogershausen@esss.se>
To: "Tech-talk@aps.anl.gov" <Tech-talk@aps.anl.gov>
Date: Thu, 8 Mar 2018 17:40:14 +0100
Hej motorists,

I recently learned about the transform record,
which can be used to control a slit with 2 physical
axes in the way that you can set the values for GAP and
CENTER and the position of the physical blades are
calculated. (Or vice versa)

Does anybody have a super-duper-luxus template file
which uses 4 soft motors together with some calc
and transform records ?

Thanks in advance
/Torsten

Replies:
Re: Controling a slit system with 2 hard and 4 soft motorrs Mark Rivers
RE: Controling a slit system with 2 hard and 4 soft motorrs Goetze, Kurt A.

Navigate by Date:
Prev: Autolab Potentiostat IOC Dawood Awny Dawood Alnajjar
Next: Re: Controling a slit system with 2 hard and 4 soft motorrs Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019 
Navigate by Thread:
Prev: Autolab Potentiostat IOC Dawood Awny Dawood Alnajjar
Next: Re: Controling a slit system with 2 hard and 4 soft motorrs Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  <20182019 
ANJ, 08 Mar 2018 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·