| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | PV gateway renders PVs as disconnected |
| From: | "Abdalla Ahmad" <[email protected]> |
| To: | "[email protected]" <[email protected]> |
| Date: | Wed, 28 Mar 2018 11:48:23 +0000 |
|
Hi We are running the gateway on a virtual server with 1 network interface, this server can see all the different LANs (office, machine, beamlines, etc.) through routing rules and access
lists done by the IT group. When the gateway is running, after a while entire IOCs gets disconnected. We are running the gateway with no arguments but in the .bashrc file we are defining EPICS_CA_ADDR_LIST having the IP address for the gateway to look at (Not
all IOCs). This behavior happened when having all IOCs or some of them in the address list. I came upon this video from APS
https://www.youtube.com/watch?v=Y5Ge89Y4d1E In which, as I understood, they have multiple gateways running on the server with each gateway connects one network interfaces together to the other interfaces.
So my questions are:
1.
What is happening with our setup? Some CA loops happens at some point?
2.
Is having a network interface per VLAN optional or recommended? Best Regards, Abdalla Ahmad Control Engineer SESAME Allan, Jordan. Tel: (+962-5) 3511348 , ext. 265 Fax: (+962-5) 3511423 Mob: (+962-7)88183296 |