1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | force record processing for same parameter value in asyn port driver |
From: | "Kim, Kukhee" <[email protected]> |
To: | Mark Rivers <[email protected]>, EPICS Tech Talk <[email protected]> |
Cc: | "Kurty, Thomas Charles" <[email protected]>, "Weaver, Matt" <[email protected]> |
Date: | Fri, 30 Mar 2018 20:11:44 +0000 |
Hi Mark, I am using asyn port driver for LCLS1 mission readiness project, and now am trying to integrate it with our Beam Synchronous Acquisition (BSA) system. The BSA assumes, data source PV is processed every time, even the PV has same value with the previous processing, I am using asyn port driver for the data source PVs. In asyn port driver, if parameter has same value (no change), it does not make record processing. Is there any option to make force record processing even no change on the parameter? Thank you for your help. Best regards, Kukhee ------------------------------------------- Kukhee Kim SLAC National Accelerator Laboratory 2575 Sand Hill Rd, MS 64 Menlo Park, CA 94025 Email: [email protected] Phone: (650)926-4912 Fax: (650)926-3800 |