| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 <2018> 2019 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: SOLEIL's TimEx3 |
| From: | Mark Rivers <[email protected]> |
| To: | 'Mark Engbretson' <[email protected]>, 'Silver' <[email protected]>, 'Talk EPICS Tech' <[email protected]> |
| Date: | Fri, 11 May 2018 20:55:35 +0000 |
|
There is also the higher-end PandaBox. This also an opensource hardware project with EPICS support. http://quantumdetectors.com/pandabox/
Mark From: [email protected] [mailto:[email protected]]
On Behalf Of Mark Engbretson Is this something that you already have any want to use? If so, drivers for what? Epics?
If this is for a new project that you don’t already have hardware for, there are more recent/modern FPGA implementations that are slightly more off the shelf
solutions. i.e., EPICS softGlue. https://epics.anl.gov/bcda/synApps/softGlue/softGlueDoc.html From:
[email protected] <[email protected]>
On Behalf Of Silver hi, all: Can anyone share software drivers for SOLEIL's TimEx3 boards? Its a opensource hardware project can be found here: Thanks a lot in advance. Best wishes Geyang 2018-05-12 |