Hi all,
EPICS Qt 3.6.4 has been released and available at GitHub.
Note: there was an unannounced release just before Christmas, so be sure to read
the r3.6.3 release notes as well.
All the repositories (apart from the binaries) have been tagged r3.6.4
to being converted from .docx files to .html files) so look a lot “cleaner”.
After sending this e-mail, I’ll be starting to integrate release 3.7.1 changes from
our local source repository to the GitHub’s repos. The 3.7 series incorporates
PV Access. Until 3.7.1 is formally release I would stick to the r3.6.4 tag files.
However, if you are feeling adventurous and want to build from the HEAD files,
as a minimum you will need to pull in the acai library (new dependency) available
configure RELASE file to update ACAI definition.
More details when 3.7.1 is actually released.
Cheers
Andrew C Starritt
Manager - Accelerator Controls and Support Systems
Australian Synchrotron
|
|
Important: This transmission is intended only for the use of the intended addressee. It is confidential to the intended addressee
and may contain privileged information and or copyright material. If this email is not intended for your attention, any use, printing, storage, reproduction or further disclosure of this communication (including all attachments) is strictly forbidden. If you
have received this transmission in error, please notify me by telephone or email and immediately delete all copies of this transmission as well as any attachments.