| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | RE: Pro-Dex Oregon Micro Systems EPICS hardware support |
| From: | Mark Rivers via Tech-talk <[email protected]> |
| To: | 'Earl Green' <[email protected]> |
| Cc: | "[email protected]" <[email protected]> |
| Date: | Wed, 20 Feb 2019 00:32:24 +0000 |
|
Hi Earl, The EPICS motor software is in this repository on Github: https://github.com/epics-modules/motor
The software for your company’s products is in these 2 directories: https://github.com/epics-modules/motor/tree/master/motorApp/OmsSrc
https://github.com/epics-modules/motor/tree/master/motorApp/OmsAsynSrc
There is a plan to split up the motor repository into a base module with the core code, and then separate repositories for each vendor. I think this is planned for the near future. The best person to talk to is Kevin Peterson at the Advanced Photon Source at Argonne ([email protected]). Mark From: [email protected] <[email protected]>
On Behalf Of Earl Green via Tech-talk My name is Earl Green at OMS Motion, Inc. My company has previously made and supported EPICS drivers for VME and MAXnet hardware under Pro-Dex, Inc. We are looking to extend support
for future Modbus and PCI hardware. I am reaching out for resources as far as the best person to contact in this task and the current status of the software for Oregon Micro Systems hardware and where to find it. Thank you, Earl Green Earl Green | Software Engineer
800.707.8111 (Main) 503.629.8081 (Office) 503.629.0688 (Fax) Visit our website:
www.OMSmotion.com
|
