| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Pro-Dex Oregon Micro Systems EPICS hardware support |
| From: | "Peterson, Kevin M. via Tech-talk" <[email protected]> |
| To: | "Rivers, Mark L." <[email protected]>, 'Earl Green' <[email protected]> |
| Cc: | "[email protected]" <[email protected]> |
| Date: | Wed, 20 Feb 2019 22:56:27 +0000 |
Earl,
Everything Mark said is correct. I hope to begin the split of the motor
repository very soon.
I subscribe to tech-talk, but the number of unread tech-talk messages in
my inbox is usually much higher than I care to admit.
Kevin
On 2/19/19 6:32 PM, Mark Rivers via Tech-talk wrote:
> Hi Earl,
>
> The EPICS motor software is in this repository on Github:
>
> https://github.com/epics-modules/motor
>
> The software for your company’s products is in these 2 directories:
>
> https://github.com/epics-modules/motor/tree/master/motorApp/OmsSrc
>
> https://github.com/epics-modules/motor/tree/master/motorApp/OmsAsynSrc
>
> There is a plan to split up the motor repository into a base module with
> the core code, and then separate repositories for each vendor. I think
> this is planned for the near future.
>
> The best person to talk to is Kevin Peterson at the Advanced Photon
> Source at Argonne ([email protected] <mailto:[email protected]>).
>
> Mark
>