Experimental Physics and Industrial Control System
Hi Randall,
The SmarGon is controlled by a PowerPMAC so you can use the 'pmac' support module to control it.
At Diamond we used an additional PLC to get translate the SmarAct selected positional variables to ones we typically use for coordinate systems, but other than that, the pmac driver will allow you to drive the axes as any other motorised stage.
Thanks,
James
-----Original Message-----
From: Tech-talk [mailto:[email protected]] On Behalf Of Randall Cayford via Tech-talk
Sent: 09 September 2019 20:24
To: [email protected]
Subject: Driver for Smargon gniometer
We have a Smargon goniometer (from SmarAct) and we’re trying to run it using EPICS. Is there a driver available for this? I’ve searched but not found anything that seems appropriate. Or do I need to use a non-specific pmac driver and customize it for the Smargon?
Thanks.
Randall
--
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
- Replies:
- Re: Driver for Smargon gniometer Randall Cayford via Tech-talk
- References:
- Driver for Smargon gniometer Randall Cayford via Tech-talk
- Navigate by Date:
- Prev:
Re: Re: use CA Client in Xilinx MicroBlaze system 肖麟阁 via Tech-talk
- Next:
Re: use CA Client in Xilinx MicroBlaze system Johnson, Andrew N. via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
<2019>
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Driver for Smargon gniometer Randall Cayford via Tech-talk
- Next:
Re: Driver for Smargon gniometer Randall Cayford via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
<2019>
2020
2021
2022
2023
2024