EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020 
<== Date ==> <== Thread ==>

Subject: rmt CCExecInit problem
From: Tasaddaq Khan via Tech-talk <tech-talk@aps.anl.gov>
To: tech-talk@aps.anl.gov
Date: Thu, 7 Nov 2019 15:08:47 +0500
Hi

I have added following line in my st.cmd

dbLoadRecords("db/test.db")

rmt
epicsThreadSleep 5
rmtConfig master.conf
epicsThreadSleep 2
CCExecInit
epicsThreadSleep 15
iocInit
epicsThreadSleep 5
rmtStart
epicsThreadSleep 10

I got the following error:
A call to 'assert(dbLockIsInitialized)' by thread 'cceTraverse' failed in
../dbLock.c line 245. EPICS Release EPICS R3.14.12.8

rmt:CCEXEC:GetStatus returned INVALID_ERROR --> PRR not in sync

Also when i comment out my dbLoadRecords("db/test.db"), then there is no error but database does not synchronize.

Please tell me how to solve this problem?

Tasaddaq

Replies:
Re: rmt CCExecInit problem Michael Davidsaver via Tech-talk

Navigate by Date:
Prev: RE: Streamdevice segmentation fault Hill, Bruce via Tech-talk
Next: Re: Waveform record not sending monitor on .NORD field Lucas Russo via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020 
Navigate by Thread:
Prev: Re: init a waveform Johnson, Andrew N. via Tech-talk
Next: Re: rmt CCExecInit problem Michael Davidsaver via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  <20192020