1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 <2019> 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Ethernet to RS-232 Danfysik supply connection issues |
From: | Marissa Kranz via Tech-talk <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Mon, 23 Dec 2019 16:29:13 -0800 |
Hello,I am trying to establish remote control of a Danfysik system 9700 magnet power supply via a Moxa ethernet to RS-232 adapter (NPort 5150). We can talk to the Moxa adapter just fine and confirm that message sent from EPICS or a terminal successfully reach the adapter, but the supply never responds nor sends any error messages or anything. Talking directly to the power supply via an old machine with a serial port also gets no response from the supply.
Has anyone ever used the Danfysik system 9700 and have any wisdom they could offer?
Thank you, Marissa Kranz -- Marissa Kranz Research Engineer UW Medical Cyclotron Facility University of Washington School of Medicine 425.246.4964