| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 <2020> 2021 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Archiver Appliance PVs never connect to be archived, always "Initial Sampling" |
| From: | "Shankar, Murali via Tech-talk" <tech-talk at aps.anl.gov> |
| To: | Jeong Han Lee <citadel.lee at gmail.com> |
| Cc: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
| Date: | Fri, 30 Oct 2020 20:52:41 +0000 |
|
Yeah; you have to restart the engine for changes to the EPICS environment to take effect. The policy is reloaded every so often and thus can be updated at run time.
Regards,
Murali
From: Jeong Han Lee <citadel.lee at gmail.com>
Sent: Friday, October 30, 2020 1:32 PM To: Shankar, Murali <mshankar at slac.stanford.edu> Cc: tech-talk at aps.anl.gov <tech-talk at aps.anl.gov> Subject: Re: Archiver Appliance PVs never connect to be archived, always "Initial Sampling" Hi Murali,
I have one naive question about the following situation. After the archiver was started, in case that I have to change these variables. * Should I restart the service after changing these variables? * If so, is there any way to update them while the archiver is running? Best, Han On Fri, Oct 30, 2020 at 7:55 AM Shankar, Murali via Tech-talk <tech-talk at aps.anl.gov> wrote: > > The archiver needs a proper EPICS setup for it to connect to the IOC's. The engine's arch.log should print out the actual CA configuration being used so you can look there to see if the EPICS setup was inherited correctly from your .profile. > > Regards, > Murali > |