1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | GUI for MCA Record |
From: | "Smith, William via Tech-talk" <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov>, Mark Rivers <rivers at cars.uchicago.edu> |
Date: | Wed, 11 Aug 2021 09:59:40 +0000 |
Hi Mark, Everyone, I have used the mca record to connect to a Bruker/Rontec Silicon Drift Detector. It works nicely, as does the supplied example GUI in Phoebus. I would like to allow my users to specify calibration to scale from mca waveform bin to energy, and then be able to specify regions of interest in terms of energy rather than bin start and ends.
I saw in the documentation that it’s mentioned an IDL app exists to do this, and that it had been ported to python. (https://cars.uchicago.edu/software/epics/mcaDoc.html)
I think this is now in the “Legacy” folder of epicsapps
https://github.com/pyepics/epicsapps/tree/master/Legacy/MCADisplay I could not get it to run. What tools are other people using to interact with the mca record? Do I need to make extra records to hold the converted waveform, and ROI’s or can I deal with this just by conversion in the display tool?
Many thanks, Will Helmholtz-Zentrum Berlin für Materialien und Energie GmbH Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V. Aufsichtsrat: Vorsitzender Dr. Volkmar Dietz, stv. Vorsitzende Dr. Jutta Koch-Unterseher Geschäftsführung: Prof. Dr. Jan Lüning (Sprecher), Prof. Dr. Bernd Rech, Thomas Frederking Sitz Berlin, AG Charlottenburg, 89 HRB 5583 Postadresse: Hahn-Meitner-Platz 1 14109 Berlin Deutschland |