Re: Support for recent general purpose oscilloscopes?

["Brown, Garth via Tech-talk" <tech-talk at aps.anl.gov>]

The Siglent scope says it supports SCPI commands, so it probably works similarly to the other scopes that already have EPICS support. Web interfaces have been an issue in some areas. Some of our networks are isolated, so the scope or browser can't connect to the manufacturers site to load all the parts of the page.

Garth

---

From: Leblanc, Gregory <leblanc at ohio.edu>
Sent: Tuesday, October 12, 2021 8:16 AM
To: Brown, Garth <gwbrown at slac.stanford.edu>; tech-talk at aps.anl.gov <tech-talk at aps.anl.gov>
Subject: RE: Support for recent general purpose oscilloscopes?

 

I can’t say anything about EPICS support, but the ones we’re lugging around the lab for general troubleshooting these days are Siglent SDS1202X-E.  We’ve also used the remote control/web software on these scopes to help support remote learning.  I’d love to hear what other folks are using as well.

     Greg

 

--

Gregory Leblanc

Accelerator Engineer

Edwards Accelerator Lab - Ohio University

123 University Terrace

Athens, OH 45701 USA

leblanc at ohio.edu

M: (401) 52-OUAL1 or (401) 526-8251

 

 

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Brown, Garth via Tech-talk
Sent: Monday, October 11, 2021 5:46 PM
To: tech-talk at aps.anl.gov
Subject: Support for recent general purpose oscilloscopes?

 

The oscilloscope models we have been using for general purpose experiments and troubleshooting through EPICS are all older models, no longer made, e.g. Tek's TDS series. We have new systems coming up, and the users are in the market for current production scopes. Do you have a favorite or standard that's still in production, and you could share your EPICS support for it?

 

Thanks,

Garth