1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | ADEiger R3-4 released |
From: | Mark Rivers via Tech-talk <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Fri, 10 Jun 2022 21:55:24 +0000 |
Folks, ADEiger R3-4 is now available. This is from the release notes: * Added a new Continuous mode choice for TriggerMode. In Continuous mode acquisition continues indefinitely once it is started, until the Acquire record is set to 0 (Done). If NumImages=1 and NumTriggers=1 then acquisition is rather slow, about 1 Hz, because of the overhead in the detector server. However, if NumImages or NumTriggers is greater than 1 then it will collect NumImages*NumTriggers images quickly, and then have about a 1 second delay before collecting the next set. * Fixed a problem where the AcquireTime, AcquirePeriod, and ThresholdEnergy would not have the previous values when the IOC restarted. This is because these can be set automatically when other parameters are changed, and so the readback values did not match the drive values. Added the asyn:READBACK info tag to these records so the drive values update when the readbacks are changed. The correct values are now saved with autosave. https://github.com/areaDetector/ADEiger
https://areadetector.github.io/master/ADEiger/eiger.html
Mark |