1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Substitution file, streamdevice |
From: | Donny Domagoj Cosic via Tech-talk <tech-talk at aps.anl.gov> |
To: | Ralph Lange via Tech-talk <tech-talk at aps.anl.gov> |
Date: | Mon, 11 Jul 2022 13:58:49 +0200 |
Hello,I have a user.substitution file that contains a number of entries (vacuum pumps in this case) and it works well with the IOC. When all the pumps are connected, the IOC cycles through all the entries in the substitution file. However if we disconnect one pump, we receive a No Reply error from StreamDevice and the execution of the substitution file stops at that entry. The rest of the substitution file is skipped by the IOC until the next scan cycle where it again begins from the first entry in the substitution file. Therefore the entries after the No Reply are never executed. How can I get the IOC to continue to the next entry in the substitution file when a No Reply error (for an IN command) is encountered?
Thank you in advance, -- Donny Domagoj Cosic Laboratory for Ion Beam Interactions Ruđer Bošković Institute Bijenička cesta 54 | HR-10 000 Zagreb | CROATIA T: +385 1 4561 041 | @: dcosic at irb.hr | www.irb.hr