1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 <2022> 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Industry Pack support for TIP850 under RTEMS |
From: | "Sintschuk, Michael via Tech-talk" <tech-talk at aps.anl.gov> |
To: | tech-talk <tech-talk at aps.anl.gov> |
Date: | Tue, 9 Aug 2022 08:00:54 +0000 |
Hi everyone, is someone using (or have ever used) a
TIP850 Industry Pack module from TEWS with EPICS? I have a SBS/GreenSpring VIPC616 VME-card which carries two of such modules. I can compile a RTEMS-IOC with the
epics ipac-module running on a MVME2100. The IOC finds the VIPC616 card with the two TIP850 modules: ipacAddVIPC616(0xD000,0x80000000) . . 192.168.99.250> ipacReport(2) Do I need an additional driver for the TIP850 to connect to the I/O-channels? The epics ipac-module has support for the
TIP810 CAN bus interface. Would a TIP850 driver look similar to this one? Best regards Michael Michael Sintschuk
P: +49 30 8104-4065 (BAM, Steglitz) michael.sintschuk at helmholtz-berlin.de |