EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <20232024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <20232024 
<== Date ==> <== Thread ==>

Subject: no bin file
From: lynn via Tech-talk <tech-talk at aps.anl.gov>
To: tech-talk <tech-talk at aps.anl.gov>
Date: Mon, 22 May 2023 23:14:17 +0800 (CST)
Hi all,
    Recently, i try to modify the dirver of motorAcs.
    All environment about epics,motor,asyn was good and run well.
   
    I downloaded motorAcs file from https://github.com/epics-motor/motorAcs.
    Then i modified the motorAcs file as i need.
    Now, there is not bin file after i make it.
    Could someone tell me how to make the bin file came out? Because i just know type: ../../bin/ st.cmd to start it.

Regards,
Lynn





--

lynn
邮箱:lynn0703 at yeah.net

Replies:
RE: no bin file Mark Rivers via Tech-talk

Navigate by Date:
Prev: Re: makefile compilation question NICOLE Remi via Tech-talk
Next: Re: makefile compilation question timesir via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <20232024 
Navigate by Thread:
Prev: Re: makefile compilation question timesir via Tech-talk
Next: RE: no bin file Mark Rivers via Tech-talk
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <20232024