1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Phoebus configuration and PV connection |
From: | 刘晓敏 via Tech-talk <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Thu, 24 Aug 2023 11:26:45 +0800 (GMT+08:00) |
Hi,
I had a problem with phobus, when phoebus and alarm-server are on the same server, it runs without problems. But when I put phoebus-product on the client side and alarm-server on the server side, run ./phoebus.sh on the client side, and run ./alarm-server.sh on the server side, the phoebus connection fails, showing ‘No Alarm Server Connection’.
Kafka running on the service end is no problem. The configuration file settings .ini is as follows:
org.phoebus.pv.ca/addr_list=10.101.1.1
org.phoebus.applications.alarm/server=10.101.8.1:9092
org.phoebus.applications.alarm/config_alarm=Accelerator
org.phoebus.applications.alarm/config_alarm=Accelerator,Demo
I don't think there's anything wrong with that.
What is the reason for this error?
Thanks,
xiaomin