1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: [External] Alternative Glassman PS FJ option |
From: | Han Lee via Tech-talk <tech-talk at aps.anl.gov> |
To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
Date: | Wed, 18 Oct 2023 10:49:47 -0700 |
Han,
We were looking at PSUs from Matsusada for HV. Our control system is mostly using 0-10V DAC outputs, so I haven't looked for direct EPICS support. They claim to support RS232 and Ethernet, so support is probably not too hard to develop using StreamDevice. I didn't quickly find a list of commands that they support via serial/ethernet.
Greg
On 10/17/2023 8:56 PM, Han Lee via Tech-talk wrote:
Use caution with links and attachments.Hi All,
Do you know the alternative PS option to replace the Glassman PS FJ unit?Our stakeholder found the Spellman PS, but there is no option to integrate with EPICS by quickly searching.
Best,Han
--
Jeong Han Lee, Dr.rer.nat.Staff Scientist and EngineerLawrence Berkeley National Laboratory1 Cyclotron Road Mailstop 46R0161Berkeley, CA 94720, United StatesLab: +1 510 486 6163
Cell: +1 510 384 3868-- Gregory Leblanc Accelerator Engineer Edwards Accelerator Lab - Ohio University 123 University Terrace Athens, OH 45701 USA leblanc at ohio.edu M: (401) 52-OUAL1 or (401) 526-8251