| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 <2023> 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | caput works only the first time |
| From: | "Tran, Phi Dung via Tech-talk" <tech-talk at aps.anl.gov> |
| To: | "tech-talk at aps.anl.gov" <tech-talk at aps.anl.gov> |
| Date: | Fri, 17 Nov 2023 20:20:24 +0000 |
|
Hi,
After starting st.cmd, I caput $(P) 1 which is my soft channel and it successfully moved the other three real motors.
Subsequently, I repeat caput $(P) 2 or any other values less than 20 or greater than -20. By setting $(P).TPRO to 1, I can see that it was process
but it did not continue to field(OUT,"$(P)-AM PP MS") like the first input after launching st.cmd.
Please advice.
Thank you,
Phi
|
Attachment:
galil0_pitch.db
Description: galil0_pitch.db