| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | AreaDetectors - ADPylon |
| From: | Donny Domagoj Cosic via Tech-talk <tech-talk at aps.anl.gov> |
| To: | Ralph Lange via Tech-talk <tech-talk at aps.anl.gov> |
| Date: | Tue, 30 Apr 2024 12:57:28 +0200 |
Hello,I successfully compiled AreaDetects R3-13 and added the ADPylon option into the config file with the path to the Pylon SDK (v7.4.0). The ADPylon module was created and I followed the instructions for reading the XML file from a Basler Camera and created the db and adl files using ADGenICam. I modified the st.cmd file in the ADPylon IOC with the address of the camera I want to connect to but when I run the st.cmd file I noticed that the envPaths file is missing from the folder.
Do I have to separately compile the ADPylon IOC? If I try this, I get an error that I am missing the Pylon library even though the path is defined to "/opt/pylon/". Could this be because I am using a newer version of Pylon SDK? Which version has been tested with this IOC?
Additionally, after I start the IOC, how can I display the video from the camera in CS-Studio Pheobus?
Thank you in advance, -- Donny Domagoj Cosic Laboratory for Ion Beam Interactions Ruđer Bošković Institute Bijenička cesta 54 | HR-10 000 Zagreb | CROATIAT: +385 1 4561 041 | @: dcosic at irb.hr | https://urldefense.us/v3/__http://www.irb.hr__;!!G_uCfscf7eWS!awxZd8NQygTXOqUSZfkGWCcBIzltGfzJzeBXzaEhYN5KzDzwdPNTaBcy_HC02DLAb-Vf9jhfrcIKiAktbbwBIwOdaZ7E8kfZ$