Re: Simple CAN bus over ethernet interface

[Florian Feldbauer via Tech-talk <tech-talk at aps.anl.gov>]

Hi Richard,

we made good experience with CAN Adapters from PEAK Systems:

e.g. the USB adapter:
https://urldefense.us/v3/__https://www.peak-system.com/PCAN-USB.199.0.html__;!!G_uCfscf7eWS!c0X9oc-bRv6_fspzA8fYWNrvSyFyQ6efcZdhG5a0J-RmvWkSTkPvThAtEwKoKF9I9K9irVNkhAMl2_SkvPVv-rwP6grMQszHjF8$ 

or the PCIe Adapter card:
https://urldefense.us/v3/__https://www.peak-system.com/PCAN-PCI-Express.206.0.html__;!!G_uCfscf7eWS!c0X9oc-bRv6_fspzA8fYWNrvSyFyQ6efcZdhG5a0J-RmvWkSTkPvThAtEwKoKF9I9K9irVNkhAMl2_SkvPVv-rwP6grM6JHhTwc$ 

We also have a custom CAN hat for the Raspberry Pi that we use.


Cheers,
Florian


On 9/24/24 18:47, Evans, Richard K. (GRC-H000) via Tech-talk wrote:
> Hello,
>
> We have a new project requirement to read status via CAN bus into EPICS. Anyone have any advice on what CAN bus I/O hardware for a PC to buy?
>
> Thanks!
> /Rich
>
> - Richard Evans, NASA Neil A. Armstrong Test Facility
>    Information Systems Management
>    https://urldefense.us/v3/__http://www.linkedin.com/in/rkevans__;!!G_uCfscf7eWS!bz-iDxADUWBxrOLRRBo-R1ZpgZWWhU7_9T-Te4aRAp3HHHBI8xcwNFzcjSKXDYdsxz7oNvjw9wrvJ2gCnlzQ1nxzds1uAVjt$
>    ©216.973.4398
--
Ruhr-Universität Bochum
AG der Experimentalphysik I
Dr. Florian Feldbauer
NB 2/131 / Fach 125
Universitätsstr. 150
D-44801 Bochum

Office: NB 2/134
Phone:  (+49)234 / 32-23563
Fax:    (+49)234 / 32-14170
https://urldefense.us/v3/__https://paluma.ruhr-uni-bochum.de__;!!G_uCfscf7eWS!c0X9oc-bRv6_fspzA8fYWNrvSyFyQ6efcZdhG5a0J-RmvWkSTkPvThAtEwKoKF9I9K9irVNkhAMl2_SkvPVv-rwP6grMzNVfZbI$