| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 <2024> 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Multiple asyn ports inside asynPortDriver class |
| From: | Abdalla Ahmad via Tech-talk <tech-talk at aps.anl.gov> |
| To: | "tech-talk at aps.anl.gov" <Tech-talk at aps.anl.gov> |
| Date: | Thu, 7 Nov 2024 12:14:05 +0000 |
|
Hi I am writing an EPICS driver for an Ethernet-based device in which the control interface is split between TCP and UDP layers of the same
port number (i.e., registers IO is through UDP while waveforms is through TCP). I have to create two asyn ports using drvAsynIPPortConfigure function, so my question is are there any consideration regarding this approach? Because I am noticing some timeout
issues, most likely from the device’s side, so I want to narrow the issue as much as I can. Thanks in advance. Best Regards, Abdalla Al-Dalleh Control Engineer SESAME P.O. Box 7, Allan 19252, Jordan Fax: +96253511423 Email :
abdalla.ahmad at sesame.org.jo |