| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025> | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025> |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: about css |
| From: | Michael Davidsaver via Tech-talk <tech-talk at aps.anl.gov> |
| To: | Mayou Hasegawa <hasegawamayou at gmail.com> |
| Cc: | tech-talk at aps.anl.gov |
| Date: | Sat, 8 Feb 2025 19:08:15 -0800 |
On 2/4/25 00:06, Mayou Hasegawa via Tech-talk wrote:
Hello, I have a question regarding CSS. I would like to check alternately 2 different PVs on one screen. Simple example: If I choose the pv PM1 in the combo box, it press the LEDs and buttons related to PM1, and if i choose PM2, it press the LEDs and buttons related to PM2. Can I use it on one screen without creating a new OPI window or tab? I put a macro in the PM$(N) number. Please give me some advice on how to do it, RULE, ACTION, SCRIPT. I attatched my opi file also.
If I understand correctly, then one common way to accomplish this is to use an Action Button to open the same opi/bob file again with some macro values replaced. Here is an example with two rows of buttons to select ADC channels. One row redefines the $(P) macro: https ://github.com/osprey-dcs/atf-acq-ioc/blob/1e2c244e3cfa9313a5908dce7d981dd41537ad6a/opi/scope.bob#L940-L958