Re: String manipulation from IOC Output

[Dariush Hampai via Tech-talk <tech-talk at aps.anl.gov>]

Dear all,
after a big help from Mark and Maurizio, I developped the IOC of an Ortec 994 with card 99X-1 for serial interface.
In my github page who need can download the sources.

https://github.com/Teclis77/Ortec-994

Thanks to all

Dariush

Il 22/04/2025 20:12, Dariush Hampai ha scritto:

Dear all,

I’m developing an hardware IOC for NIM Ortec chain, with Ortec 994 Dual Counter and RS232 99X-1 card interface).

Following the examples and tutorials, I wrote a db and a proto files where I included the call functions. One of them is the SHOW Count function, that gives the following answer (via telnet)

SHOW_COUNT

0000000;0000000;

%0000069

The first answer are the two channels counts, while the second one is the Counter has properly answered and it is ready.

My proto files contains the following call for simple read the display (SH_COU is the abbreviation of SHOW_COUNT)

getCount {

        out "SH_COU";

        in "%s";

}

and for starting count

setStart {

        out "START";

        in "%s";

        wait = 1500; 

        out "SH_COU";

        in "%s";

        ExtraInput = Ignore;

        out "CL_COU";

        in "%s";

        out "STOP";

        in "%s";

}

In the same proto file I define the display (0 or 1 for display A or B)

setDisplay {

        out "SET_DISPLAY %s";

        in "%s";

        ExtraInput = Ignore;

        @init {

                out "SET_DISPLAY 0";

                in "%s";

        }

}

The question is: how can I read only the display A or display B (depending on setDisplay) if the outpuit is “ 0000000;0000000; “

Thank you in advance

Dariush

p.s.: I know that in Scaler module there is already am Ortec974 module, but the cpp file is optimized for that nim module (4 channels) and for GPIB communication, while my ortec994 is serial through MOXA NPORT converter (RS232 to IP), so I should modify too much the sources.

************************************

Dr. Dariush Hampai, PhD

INFN - LNF
X-Lab Frascati
Via E. Fermi, 54 (ex 40)
I-00044 Frascati (RM)
Italy

************************************