EPICS Home

Experimental Physics and Industrial Control System


 
2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024 Index 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024
<== Date ==> <== Thread ==>

Subject: Re: separate ca/pva ports for r/w and r/o access?
From: Ralph Lange via Core-talk <core-talk at aps.anl.gov>
To: EPICS Core Talk <core-talk at aps.anl.gov>
Date: Fri, 26 Jan 2024 20:02:40 +0100
On Fri, 26 Jan 2024 at 19:38, Johnson, Andrew N. via Core-talk <core-talk at aps.anl.gov> wrote:

 

It would be relatively easy to run separate CA (and PVA) gateways on a other ports to provide read-only access; this would work for all EPICS versions.


Yes.
If these Gateways are running on the same host and connect to the IOC through localhost/loopback, the difference to Dirk's original idea would be pretty hard to tell from the outside.
If the IOC handles read-write vs. read-only, the Gateway configuration is trivial.

Cheers,
~Ralph

Replies:
Re: separate ca/pva ports for r/w and r/o access? Zimoch Dirk via Core-talk
References:
separate ca/pva ports for r/w and r/o access? Zimoch Dirk via Core-talk
Re: separate ca/pva ports for r/w and r/o access? Johnson, Andrew N. via Core-talk

Navigate by Date:
Prev: Re: separate ca/pva ports for r/w and r/o access? Johnson, Andrew N. via Core-talk
Next: Re: separate ca/pva ports for r/w and r/o access? Zimoch Dirk via Core-talk
Index: 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024
Navigate by Thread:
Prev: Re: separate ca/pva ports for r/w and r/o access? Johnson, Andrew N. via Core-talk
Next: Re: separate ca/pva ports for r/w and r/o access? Zimoch Dirk via Core-talk
Index: 2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  <2024