Pointing an IOC to system-level lib files for build

[Katie Matusik via Tech-talk <tech-talk at aps.anl.gov>]

Hi everyone,

I have a .so file that lives on the system and is required by an IOC for successful compilation. A workaround at the moment is to build the IOC, let it fail so that it creates the ../../lib/linux-x86_64 directory, then manually symlink the files from the system directory to this lib directory so that they exist in the subsequent build attempt. Could someone let me know what is the correct way to circumvent this so that the IOC will include the system directory during its first build?

Thanks so much and please let me know if you need further information.

Best,

Katie 

--

Katie Matusik

Systems Engineer

Sigray, Inc.

5750 Imhoff Drive, Suite I

Concord, CA 94520 USA

Office: 1 (925) 326 - 7926

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited