| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 2025 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Problems encountered in installing genSub module |
| From: | "Johnson, Andrew N. via Tech-talk" <tech-talk at aps.anl.gov> |
| To: | "gjzhai at mail.ustc.edu.cn" <gjzhai at mail.ustc.edu.cn> |
| Cc: | EPICS tech-talk <tech-talk at aps.anl.gov> |
| Date: | Mon, 4 Oct 2021 17:18:29 +0000 |
On Oct 3, 2021, at 10:38 PM, gjzhai via Tech-talk <tech-talk at aps.anl.gov> wrote:
The above path is almost the same as the install path to the VxWorks 6.9 C compiler for PowerPC at the APS, except for the ‘W’ character in ‘4.3.3-vxWorks-6.9’ which is lower-case in our installation.
Are you wanting to build this code for PowerPC on VxWorks? I know that Gemini (who created the genSub) also use that architecture, but I don’t see how their gensub module could be causing the above issue. If you are working with or for Gemini you should
probably ask them (or Andy Foster) for help.
Do you really need the gensub module at all? A cut-down version of the genSubRecord was added to EPICS Base called the aSub record, and for most applications that should be able to perform the same functions. The aSub is being maintained as part of EPICS
Base, whereas I don’t know the status of the gensub module.
- Andrew
--
Complexity comes for free, simplicity you have to work for.
|