1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 2025 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 <2021> 2022 2023 2024 2025 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: arv-tools not detecting USB3 camera |
From: | "Engbretson, Mark S. via Tech-talk" <tech-talk at aps.anl.gov> |
To: | "Gofron, Kazimierz" <kgofron at bnl.gov> |
Cc: | "tech-talk at aps.anl.gov \(tech-talk at aps.anl.gov\)" <tech-talk at aps.anl.gov> |
Date: | Mon, 13 Dec 2021 18:59:30 +0000 |
Is the version of aravis that you are using built with the USB3 support enabled? From: Gofron, Kazimierz <kgofron at bnl.gov> Hi Mark, Good point, and I did not install aravis udev rules yet. However, when arv-tools is run as root, it does not detect the USB3 camera either. [root@xf11id-m3 ~]# arv-tool-0.8 -d all ===== Something else is missing on RedHat... Kaz From: Engbretson, Mark S. <engbretson at anl.gov> Do you have the aravis udev rules installed so that non root accounts can actually see the usb3 hardware? From: Tech-talk <tech-talk-bounces at aps.anl.gov>
On Behalf Of Gofron, Kazimierz via Tech-talk Hi, I have a USB3 Grasshopper3 GS3-U3-51S5C camera that arv-tools-0.8 is not detecting. The GS3-U3-51S5C supports
USB3 Vision v1.0, OS: Redhat 8.4 {Aravis detects only my GigE cameras:} kgofron@xf11id-m3:/epics/iocs$ arv-tool-0.8
Point Grey Research-Blackfly BFLY-PGE-50S5C-18457368 (192.168.11.11) Point Grey Research-Blackfly BFLY-PGE-50S5C-18481534 (192.168.11.12) {arv-tools with options does not list usb camera either} kgofron@xf11id-m3:/epics/iocs$ arv-tool-0.8 -d all ---- ============ {The camera shows up in libusb and /dev/bus/usb, but is not found by arv-tool:} kgofron@xf11id-m3:/epics/iocs/cam-aravis1$ lsusb kgofron@xf11id-m3:/epics/iocs$ ls /dev/bus/usb/002/003 {USB camera is on bus 002 device 003} Camera details: kgofron@xf11id-m3:/dev/bus/usb/002$ usb-devices
T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e10 ProdID=3300 Rev=00.00 S: Manufacturer=Point Grey Research S: Product=Grasshopper3 GS3-U3-51S5C S: SerialNumber=0123EF71 C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ef(misc ) Sub=05 Prot=00 Driver=(none) I: If#=0x1 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=05 Prot=01 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=05 Prot=02 Driver=(none) ============ USB support is installed: libusb-devel.x86_64 libusbx-devel.x86_64 ============= Any suggestions about this problem? Kazimierz Gofron |