arv-tools not detecting USB3 camera

["Gofron, Kazimierz via Tech-talk" <tech-talk at aps.anl.gov>]

Hi,

I have a USB3 Grasshopper3 GS3-U3-51S5C camera that arv-tools-0.8 is not detecting.

The GS3-U3-51S5C supports USB3 Vision v1.0, 

OS: Redhat 8.4

{Aravis detects only my GigE cameras:}

kgofron@xf11id-m3:/epics/iocs$ arv-tool-0.8

Point Grey Research-Blackfly BFLY-PGE-50S5C-18457368 (192.168.11.11)

Point Grey Research-Blackfly BFLY-PGE-50S5C-18481534 (192.168.11.12)

{arv-tools with options does not list usb camera either}

kgofron@xf11id-m3:/epics/iocs$ arv-tool-0.8 -d all
[15:02:46.093] ?? interface> [GvDiscoverSocket::new] Add interface 127.0.0.1 (127.0.0.1)

----

============

{The camera shows up in libusb and /dev/bus/usb, but is not found by arv-tool:}

kgofron@xf11id-m3:/epics/iocs/cam-aravis1$ lsusb
Bus 002 Device 003: ID 1e10:3300 Point Grey Research, Inc.

kgofron@xf11id-m3:/epics/iocs$ ls /dev/bus/usb/002/003
/dev/bus/usb/002/003

{USB camera is on bus 002 device 003}

Camera details:

kgofron@xf11id-m3:/dev/bus/usb/002$ usb-devices

T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0

D:  Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1

P:  Vendor=1e10 ProdID=3300 Rev=00.00

S:  Manufacturer=Point Grey Research

S:  Product=Grasshopper3 GS3-U3-51S5C

S:  SerialNumber=0123EF71

C:  #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=896mA

I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ef(misc ) Sub=05 Prot=00 Driver=(none)

I:  If#=0x1 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=05 Prot=01 Driver=(none)

I:  If#=0x2 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=05 Prot=02 Driver=(none)

============

USB support is installed:

libusb-devel.x86_64

libusbx-devel.x86_64

=============

Any suggestions about this problem?

Kazimierz Gofron