RE: MVME 5500 How to flash the VxWorks bootrom?

[whitetiger1123 via Tech-talk <tech-talk at aps.anl.gov>]

I solved this error and try to set client, server, gateway, subnet ip address.

It was because of “Warning: Global Environment Variable Area is uninitialized, use gevInit.”

I did it gevInit and pressed Y, it changed.

 

 

Btw there’s no way how to change subnet IP address mask.

How can I know the command?

 

I already changed cliend as cipa, server as sipa, gateway as gipa.

 

Thank you always for your help and advice.

Best and Regards,

Baeg

 

보낸 사람: whitetiger1123
보낸 날짜: 2024년 8월 30일 금요일 오후 3:46
받는 사람: tech-talk at aps.anl.gov
제목: MVME 5500 How to flash the VxWorks bootrom?

 

Hello all,

Currently, we are using the mvme6100 model. However, we heard that it will be discontinued. We would like to secure an additional 5500 or 3300 model for maintenance. However, before purchasing, we would like to make sure that the mvme5500 we have is compatible with vxworks6.9 os.

I'm trying to copy this link from Tech Talk.
https://epics.anl.gov/tech-talk/2004/msg00847.php

As for the jumper setting, I set the jumper j8 to flash1 as told here.

Copyright Motorola Inc. 1999-2003, All Rights Reserved

MOTLoad RTOS Version 2.0,  PAL Version 1.1 RM02

Tue Jul 1 16:34:30 MST 2003

Warning: Global Environment Variable Area is uninitialized, use gevInit.

MPU-Int Clock Speed =1000MHz

MPU-Ext Clock Speed =133MHz

MPU-Number/Type = 0/MPC7455

MPU-Int Cache(L2) = 256K, Enabled, L2CR =0xC0000000

MPU-Ext Cache(L3) =   2MB, Enabled, 200MHz, L3CR=0xDF826000

Reset/Boot Vector    =Flash1

Local Memory Found   =20000000 (&536870912)

User Download Buffer =005C3000:007C2FFF

MVME5500>  netShow

Interface            EAddress               Status      Speed         Duplex

/dev/enet0       0001AF0B1BEC                 Up        100MBS          Full

/dev/enet1       0001AF0B1BED                Downp       Unknown      Unknown

MVME5500> gevEdit mot-/dev/enet0-cipa

PReP NVRAM header test failed

 

I can’t do anything because of this red line error message.

Even if I do,

MVME5500> gevEdit mot-script-boot

PReP NVRAM header test failed

 

Can you give me any advice?

 

I really appreciate it.

Best & Regards,

Beag.