Experimental Physics and Industrial Control System
Hello everybody,
we have recently moved to VxWorks version 5.3.1 (Tornado 1.0.1)
and we have unfortunately realized that our GPIB application
(based on the NI-1014 VME interface + John Winans driver) does
not work anymore. We see initialization errors when the GPIB driver
is loaded.
We have re-built the kernel several times including/excluding facilities
such that we approach the 5.3 configuration but we have not succeded.
We have also re-built EPICS and our aplication several times but
without any progress.
Is anybody using this GPIB driver with VxWorks 5.3.1 and
EPICS R3.13.0.beta11? If not, can anybody give a hint on what
can be the problem?
Many thanks for any help or idea,
Josep Perlas
--
_____________________________________________________
Dr. Josep A. Perlas - Control System and Power Technology
Lab. Llum Sincrotro - IFAE ------------ Tel: (+34 3)581.28.38
Edifici Cn, Campus UAB ------------ Fax: (+34 3)581.19.38
E-08193 Bellaterra (Barcelona) SPAIN ---- email: [email protected]
_____________________________________________________
- Navigate by Date:
- Prev:
Re: first serial devSupp. Maren Purves
- Next:
Re: GPIB+VxWorks3.5.1 problem Bill Brown
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: first serial devSupp: drvIpac Peregrine M. McGehee
- Next:
Re: GPIB+VxWorks3.5.1 problem Bill Brown
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024