Experimental Physics and Industrial Control System
> Ralph is addressing my situation. I should clarify that I'm using mbbi for
> DTYP (raw) soft. My mbbi device's INP link references a 24-bit value
> sourced by a separate (CAMAC) record. For example, I want to specify mbbi
> values derived from 2 bits, starting at bit 9.
Thought so. I missed that feature a couple of times, too. I used calc
records doing shifts as a workaround, but this is admittedly a crappy
solution.
But as the field definitions including DCT accessibility are fix ... I
don't really have a clue what to do with Raw Soft Support. I guess you
would find other fields that should be set by device support but aren't
with Raw Soft Support if you just look hard enough.
This gets more complicated while thinking about it ... time to leave for
the weekend, then.
Ralph
- References:
- Re: MBBI, SHFT, and GDCT Paul Sichta
- Navigate by Date:
- Prev:
Re: MBBI, SHFT, and GDCT Paul Sichta
- Next:
VSD_2992 Base Address Paul Sichta
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: MBBI, SHFT, and GDCT Paul Sichta
- Next:
Re: MBBI, SHFT, and GDCT Tim Mooney
- Index:
1994
1995
1996
1997
<1998>
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024