Experimental Physics and
Industrial Control System

I want to use multiple VSD_2992 CAMAC Serial Highway drivers in one IOC.
The file 2992.h specifies the VME base address and IRQ stuff for branch 0,
but not the others.  I thought I had the info for the other branches,  but
can't locate it.

Can someone remind me of where the VMEbus info is,  for VSD_2992 branches 1
thru 7 ?

/*
 * The following constants are default hardware addresses, and interrupt
 * levels for the VSD2992 card.
 */
#define HT2992_ADDRESS  0xDE00 /* Base address for Branch 0 */
#define HT2992_IRQ_LEVEL 3 /* Interrupt Request Level */
#define HT2992_IVEC_BASE 0X80 /* Vector address for Branch 0 */
#define HT2992_NUM_CARDS 7 /* Maximum number of cards */

-ps

Navigate by Date:

Prev: Re: MBBI, SHFT, and GDCT Ralph Lange

Next: increasing scan rates Geoff Savage

Index: 1994  1995  1996  1997  <1998>  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: MBBI, SHFT, and GDCT Marty Kraimer

Next: increasing scan rates Geoff Savage

Index: 1994  1995  1996  1997  <1998>  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024