Experimental Physics and Industrial Control System
At 02:57 PM 7/6/00 -0500, Vladimir Sirotenko wrote:
>Hi,
>
>I am building base EPICS (host) under KAI compiler KCC on Linux box
>and build was ok with several warnings.
>Unfortunately, CA client does not work.
>When I run ca_test (with excas running) I got the following:
>
><d0lxbld4> ca_test janet
>CAC: post_msg(): Corrupt cmd in UDP msg d00
...
Could it be that your compilation does not handle the byte swapping?
On Linux (PCs), the macros in Epics/base/src/ca/net_convert.h
that try to figure out whether you need byte swapping or not
depend on defines like
#elif defined(_M_IX86) || defined(_X86_)
Maybe these are defined per default for gcc/g++ but not your KAI?
-Kay
(not KAI)
- References:
- Building base EPICS 3.13.2 under KAI C++ compiler Vladimir Sirotenko
- Navigate by Date:
- Prev:
Building base EPICS 3.13.2 under KAI C++ compiler Vladimir Sirotenko
- Next:
RE: Building base EPICS 3.13.2 under KAI C++ compiler Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Building base EPICS 3.13.2 under KAI C++ compiler Vladimir Sirotenko
- Next:
RE: Building base EPICS 3.13.2 under KAI C++ compiler Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024