EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
<== Date ==> <== Thread ==>

Subject: Home signal does not affect the .ATHM field of the motor record
From: Rok Sabjan <rok.sabjan@cosylab.com>
To: tech-talk@aps.anl.gov
Date: Tue, 02 Sep 2003 09:25:52 +0200
Hello everyone!

I'm having a peculiar problem here. I have a home switch which is 0 on one side of home and 1 on the other. When I move across the switch, I can see the change in the .MSTA field of the record, but only bit 4 changes and not bit 8. The .ATHM is unaffected as well.

I'm using motor record version 4.2

Any ideas?

Cheers
Rok


Navigate by Date:
Prev: Re: about NFS Billy R. Adams
Next: Re: Changes to records during asynch processing Marty Kraimer
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020 
Navigate by Thread:
Prev: RE: [Fwd: Re: Does DISP work for DB OUT links? Related question] Owens, PH (Peter)
Next: building medm on RH9/RH Motif Arne P. Freyberger
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020